Operating Principles; Fill The Water Container; Select The Function; Set The Temperature / Core Temperature - Miele DGC 6500 Operating And Installation Instructions

Operating principles

Fill the water container

Select the function

Set the temperature / core temperature

34
Before each cooking programme ensure that the filter in
the bottom of the cooking compartment is correctly fitted.
Otherwise coarse soiling could get into the drainage
system and cause a blockage.
Do not touch the door handle when opening the control
panel. You could trap your fingers.
^ Touch ? to open the control panel.
^ Remove the water container (on the right) and fill it up to
the maximum marker.
Only use cold mains tap water (below 20 °C). Never use
distilled or mineral water or other liquids.
^ Push the water container into the appliance until it
connects.
^ Touch the ? sensor to close the control panel.
^ Switch the appliance on s.
^ Select "Oven functions".
^ If the function you want does not show in the display, touch
one of the illuminated sensors to the right of the arrows in
the display until the function you want appears.
^ Touch the sensor to the left of the function you want to
select it.
^ If the recommended temperature is suitable for your recipe,
confirm it with "OK".
or
^ Set the temperature you want using the numerical keypad
and then confirm with "OK".