Operation; During Use; Interrupting Operation; Altering Settings - Miele DGC 6500 Operating And Installation Instructions

During use

Interrupting operation

Altering settings

Operation is interrupted as soon as the door is opened. The
heating will be switched off and the cooking duration
remaining stored in memory.
Steam will escape when you open the door. Step back
from the appliance and wait until the steam has
dissipated.
Danger of burning.
You could burn yourself on the oven interior, spilled food,
accessories and hot steam.
Wear oven gloves when placing food in the oven or
removing it and when handling hot food and shelves etc.
inside the appliance.
Operation will resume when the door is closed.
The oven will heat up again and the display will show the
temperature of the cooking compartment as it rises. Once the
set temperature has been reached, the display will change to
show the cooking duration remaining as it counts down.
If the door is opened 55 seconds before the end of the
programme "Process finished" will appear in the display
and the programme will not be continued.
^ Select "Change".
^ Select the setting you wish to change, e.g. "Temperature"
and then enter the change.
^ Confirm with "OK".

Operation

37