Additional Functions; Start Time / Finish - Miele DGC 6500 Operating And Installation Instructions

Start time / Finish

Entering settings
To delete a setting
You can delay the start of a programme. The oven will then
switch on automatically.
Delay start cannot be used for running the descaling
programme.
Use "Start at" to enter the time of day at which you want the
programme to start. Use "Ready at" to enter the time of day at
which you want the programme to end.
The difference between the Start time and Finish time is used
to calculate the cooking duration. The heating-up time
required is automatically calculated by the steam oven.
If the temperature in the oven is too high, e. g. just after
another programme, you will not be able to use this
function. "Start at" / "Ready at" will not appear in the display
if this is the case.
Open the oven door until the appliance has cooled down.
Cooking results can be impaired if there is a long delay
between the food being placed in the oven and the start of
cooking.
Fresh food can change its colour and even deteriorate.
^ Select the function, temperature and duration as normal.
^ Select "Change".
^ Then select "Start at" or "Ready at" and enter the time you
want the cooking programme to begin or end at.
^ Confirm with "OK".
^ Select "Change".
^ Select "Start at" or "Ready at".
^ Select "Reset".

Additional functions

45