HCIT right cover removal
1.
Carefully remove the printer or multifunction printer from the high-capacity input tray (HCIT) and remove
the HCIT from the caster base.
2.
Remove the HCIT media tray assembly. See
3.
Remove the HCIT rear cover. See
4.
Remove the six screws (A) securing the HCIT right cover to the drawer.
A
5.
Remove the HCIT right cover.
"HCIT media tray assembly removal" on page
"HCIT rear cover removal" on page
A
4-164.
4-166.
4-167
Repair information
5026