Right cover removal
See
"Right cover" on page 7-3
1.
Remove the power cord from the printer.
2.
Remove the paper tray.
3.
Remove the rear upper cover. See
4.
Open the front cover.
5.
Open the top access cover.
6.
Remove the two screws (A) on the inside front.
7.
Remove the metal screw (B) on the inside front.
for the part number.
"Rear upper cover removal" on page
[service$ on lexlab01] Y:\Manuals\Striker\Graphics\Photos\
4-36.
Striker covers -
A
B
Repair information
5026
4-37