HCIT pick arm roll removal
1.
Remove the high-capacity input tray (HCIT) media tray assembly. See
removal" on page
2.
Pull the autocompensator pick arm (A) down.
3.
Remove the pick arm roll (B) from the pick roll assembly (C).
4.
Repeat for the other pick arm roll (D).
Note: Always replace the pick arm rolls as pairs.
Installation notes:
See
"Pick arm roll removal and replacement" on page 4-119
correctly.
4-164.
A
B
C
D
to make sure the pick arm roll is oriented
"HCIT media tray assembly
Repair information
5026
4-173