Your Printer Icon Doesn't Appear In The Chooser (Macintosh); When You Select Your Printer In The Chooser, You See A Message That It Can't Be Used; You Get A Type 39 Error On The Macintosh; Fixing Paper Problems - Epson Stylus Photo User Manual

Your printer icon doesn't appear in the Chooser (Macintosh)

Possible cause
Your system has extension
conflicts.
When you select your printer in the Chooser, you see a message that it can't be
used
Possible cause
A system crash may have
corrupted your printer
software.

You get a type 39 error on the Macintosh

Possible cause
You're using System 7.5.2
Solution
In the Extensions Manager, disable Quick Draw GX. Make sure
Monitor2 and
EPSON EPSON
your Macintosh.
Solution
In your Extensions folder, delete
Monitor2, and the
EPSON
software.
Solution
Run a printer check as described on page 6-2. If the printer works
correctly, remove and reinstall your printer driver software. To
remove it, delete
EPSON
folder from your Extensions folder. Then reinstall the
EPSON
driver. You may also need to upgrade your system software.

Fixing Paper Problems

You can avoid most paper handling problems by doing the
following:
Use smooth, high-quality media designed for ink jet
printers that meets the media specifications in the
Appendix.
Follow all loading and handling instructions included with
the media.
Load the media with the printable side face up, as described
in the Quick Setup guide or Chapter 3.
If you have problems with paper feeding, paper jams, or ejected
paper, check here for solutions.
6-11
Stylus Color are enabled, then restart
Stylus (EX),
EPSON
folder. Then reinstall the printer driver
Stylus (EX), Monitor2, and the
EPSON
Troubleshooting
EPSON