Opening Screen - Epson SureColor SC-P10070 Network Manual

7. When setting an IP address using the ping command, select Enable for Set Using PING. Select
Disable when setting an IP address with EpsonNet Config; this prevents any unexpected change
of the IP address.
8. Select Enable for Acquire DNS Server Address Automatically if you want to acquire the DNS
server address using the DHCP server.
If you want to enter the DNS server address manually, select Disable and then enter the IP address
of the DNS server.
9. Select Enable for Acquire Host Name and Domain Name Automatically if you want to
acquire the host name and the domain name using the DHCP server.
If you want to specify manually, enter the host name and the domain name in the text boxes.
10. Select Enable for Register Network Interface Address to DNS Server if you want to register
the host name and domain name to the DNS server through the DHCP server that supports
Dynamic DNS.
If you want to register the host name and the domain name directly to the DNS server, select
Enable for Register Network Interface Address Directly to DNS Server.
11. Mac OS X only:
Select Enable or Disable for Use Bonjour. If you select Enable, enter the Bonjour Name and the
Bonjour Printer Name.
12. Do not exit the Web browser and do not send a job to the printer until this message appears. Follow
the on-screen instructions to reset the printer.
Note:
❏ Since the new IP address becomes available after the printer is reset, you need to restart EpsonNet
Config by entering the new IP address.
❏ Only changes on the page where you press the Transmit button take effect.

Opening Screen

Any user can access the opening screen by typing the IP address of the network interface into the
address bar of your browser.
Epson Network Guide
Network Software 35