Opening Screen - Epson EPL-6200 Network Manual

Network Guide
13. Mac OS X only:
Select Enable or Disable for Use Bonjour. If you select Enable, enter the Bonjour
Name and the Bonjour Printer Name. If your network environment supports DHCP, you
can use the printer on the network just by enabling this setting.
14. Click Submit and then enter the password to update the settings. See "Password" on
page 129 for more information on setting the password.
Note:
If you have set the Administrator Name on the Administrator screen, enter the administrator
name for the user name.
15. If the message "Configuration change is complete!" appears on your screen, the update
is complete. Do not exit the Web browser and do not send a job to the printer until this
message appears. Follow the on-screen instructions to reset the printer.
Note:
❏ Since the new IP address becomes available after the printer is reset, you need to restart
EpsonNet Config by entering the new IP address.
❏ Only changes on the page where you press the Submit button take effect.

Opening Screen

Any user can access the following screen by typing the IP address of the network interface
for the URL in your browser.
Note:
The item appears only if your printer supports the function.
Index
Home
Favorite
Help
About
EPSON Logo
Links to the opening screen.
Links to a Web site previously defined by the administrator.
Links to Help.
Links to the copyright and version information for EpsonNet Config.
Links to the Epson Web site (http://www.epson.com).
108
Network Software