Furuno FAR-3210 Operator's Manual page 44

1. OPERATIONAL OVERVIEW
No. Button name
1 PULSE
2 TUNE
TX CH
3 IR
4 ES
5 EAV
6 ACE
7 HL OFF
8 CU/TM reset
9 MAP ON/OFF
10 CHART ON/OFF
11 Chart Disp
12 OWN AIS
13 AIS message
14 Palette
15 BRILL
16 MOB
17 Capture
18 UNDO
1-16
Selects the radar pulse length.
Selects the radar receiver tuning method, automatic or manual,
and manually tunes the radar receiver.
Selects the transmit frequency from [TX CH 1] or [TX CH 2].
Activates or deactivates the interference rejector.
Activates or deactivates the echo stretch.
Activates or deactivates the echo averaging when Automatic Clut-
ter Elimination (ACE) function is off.
Activates or deactivates the Automatic Clutter Elimination (ACE)
function.
Automatic Clutter Elimination (ACE) automatically sets the gain,
rain and sea clutter controls according to the sea and rain clutter
states.
Temporarily erases everything but radar echoes.
• Puts the ship's heading at the top of the screen in course-up
mode the moment this button is pressed.
• Resets the ship's position to a point of 75% radius opposite to
the extension of the heading line passing through the display
center in true motion modes.
Shows or hides the radar map marks on the radar display, in the
radar mode.
Shows or hides the electronic chart.
Shows or hides various chart objects. Shown in the chart radar
mode. See paragraph 2.41.2.
Shows the [VOYAGE DATA] menu, to set your ship's AIS data.
Displays screen for "received AIS messages".
Selects a color palette.
Adjusts the brilliance of a FURUNO monitor.
Enters a MOB mark at the current position.
Takes a screenshot.
Restores previous condition in radar map and text input.
Description