How To Delete Enc Licenses - Furuno FAR-3210 Operator's Manual

Hide thumbs Also See for FAR-3210:

Table of Contents

4. When the installation is completed, information about the installation appears in

the [Error/Warning/Guidance] window. Click the [Confirm] button to finish.

5. If applicable, set the next sequential medium then repeat steps 2-4 to install the

next database.

Note 1: When many charts are installed, the chart system checks for error in the in-

stalled chart data at the next power up. This is not an indication of malfunction.

Note 2: Previous versions of charts cannot be displayed if installed after installing the

latest versions.

How to Delete ENC Licenses

1. Get into the Chart maintenance mode.

2. Click the [License] button on the InstantAccess bar.

3. Click the [ENC] tab as appropriate to show a list of licenses.

4. Put a checkmark next to the license(s) to delete.

5. Click the [Delete Licenses] button to delete the license(s) selected.

7. HOW TO MANAGE CHARTS

Show Quick Links

Table of Contents