Display Test - Furuno FAR-3210 Operator's Manual

22. SETTINGS MENU
22.8

Display Test

The [DIsplay Test] page displays various test patterns to check the FURUNO-supplied
monitor for proper display of colors. Click the [Display Test] button to start the test. The
buzzer sounds when the display test starts.
Left-click to proceed in the numerical order shown below; right-click to proceed in re-
verse order.
Diagonal
White
Gray
Yellow bars
To quit the display test at any time, press the ESC key on the applicable Control Unit.
22-8
(1) (2)
Gray and black
(5) (6)
Red
(9) (10)
Red bars
(13) (14)
Aqua bars
(3)
All colors
(7)
Green
(11)
Green bars Blue bars
(15)
Purple bars Gray bars
(4)
Black
(8)
Blue
(12)
(16)