How To Change A Monitored Route When Following An Instant Track Route (Safe Off Track Mode Only) - Furuno FAR-3210 Operator's Manual

How to stop monitoring an instant track route
Click the [Stop] button on the [Monitoring] page in the [Instant Track] dialog box to stop
monitoring the instant track route. The system returns to monitoring the monitored
route and the [Planning] page of the [Instant Track] dialog box opens.
For the [Back to Track] mode, the instant track mode is canceled when the vessel re-
turns to the monitored route. The instant track is grayed out to show that is inactive.
14.7.6 How to change a monitored route when following an instant
track route (safe off track mode only)
Do the following to change a monitored route while following an instant track route.
1. While monitoring an instant track route, click the [Original Route] button on the
[Monitoring] page in the [Instant Track] dialog box to show the [Select Route] dia-
log box. Check [Planned Route] to show a list of planned routes, or check [Instant
Track] to show a list of instant track routes.
2. Select the route to use. The original route or the instant track route currently in use
cannot be selected.
3. Click the [Open] button to close the dialog box. The vessel starts following the
newly selected route.
When an instant track route is completed, the vessel starts following the route selected
at step 2.
Route32 15 Nov 2013
AAAAAA 15 Nov 2013
13 Nov 2013
Route67
14. HOW TO MONITOR ROUTES
14-11