Transferring Measured Values To A Computer - Beurer BGL60 Instructions For Use Manual

7.4

Transferring measured values to a computer

The BGL60 measuring system has a built-in computer interface which you can
use to transfer the measured values stored in your unit to a computer. The con-
nection socket is located under the "PC" cover on the right side of the unit.
You can acquire the connection cable as the accessory set ‚Beurer GL32, GL34,
BGL60 PC-Kit' in a specialist store (see "Delivery scope, replacement parts and
accessories", p. 6). Enclosed with the connection cable is a CD with testing soft-
ware for evaluating your measurement results, which makes it easier for you and
your physician to follow your blood sugar trends.
For more information, please refer to the instructions included with the accessory
set. These contain all the information you require for the data transfer.
Note
• An effective evaluation is possible only if you have set the date and time
correctly (see p. 23).
• It is not possible to take a measurement during the data transmission.
• The measurement data remain stored on the measuring device after being
transferred to the computer.
Important
Only use the original data connection cable supplied by Beurer for data transfer.
Otherwise your measuring device or computer may be damaged.
Beurer BGL60 mg/dL 45