Deleting The Measured Value Memory - Beurer BGL60 Instructions For Use Manual

2 Press [M] repeatedly to display the average value for 14, 21, 28, 60 and 90
days.
If you press [M] again after the 90-day average value has been displayed, the
3
display begins again with the average value display for 7 days.
4 You can cancel the process at any time. To do so, press the ON/OFF button
or wait until the unit switches off automatically after 3 minutes.
Item Meaning
1 Average value
2 Number of blood sugar tests
within the time period, e.g. 28
tests
3 Memory symbol
4 Number of days, e.g. 7
7.3

Deleting the measured value memory

1 The measuring device must be switched off.
2 Slowly press the SET button seven times.
3 Press the button. The memory symbol
4 Press the button again.
Note: Press the ON/OFF button or the Set button to switch off the unit
without deleting measured values.
5 "CLr ALL" is displayed briefly, then "OFF" and the measuring device switches
off automatically.
44
DAY AVG
and "dEL" flash on the display.
Beurer BGL60 mg/dL
mg/dL
1
2
3
4