Transferring Measured Values - Beurer BM 54 Instructions For Use Manual

Table of Contents

Advertisement

Available languages

Available languages

• To clear individual measurements from the relevant user
memory, you must first select a user memory.
• Start the retrieval of the individual measured values.
• Press and hold the memory button M1 or M2 for 5 sec-
onds (depending on the user memory you are in).
• The selected value is deleted. The device briefly displays
CL 00.
• If you would like to delete other values, repeat the pro-
cess described above.
You can switch off the device at any time by pressing the
START/STOP
button.

8. Transferring measured values

Transfer via Bluetooth
®
It is also possible to transfer the measured values saved on the
device to your smartphone using Bluetooth
nology.
You will need the "beurer Health Manager" app for this. This is
available in the Apple App Store and from Google Play.
Proceed as follows to transfer values:
If Bluetooth
is activated in the settings menu, the data is trans-
®
ferred automatically after the measurement. The
pears in the top left of the display (see chapter 4 "Preparing the
measurement").
When connecting for the first time, a randomly-generated
six-digit PIN code is displayed on device, and at the same
time an input field appears on the smartphone in which you
low energy technology
low energy tech-
®
must enter this six-digit PIN code. After successfully entering
the code, the device will be connected to your smartphone
Step 4: BM 54
Data transfer immediately fol-
lowing measurements.
• If Bluetooth
fer has been activated,
symbol ap-
data is by transferred after
having confirmed the user
memory by pressing the
pressing the START/STOP
button
29
Step 1: BM 54
Activate Bluetooth
on your device (see chapter 4
®
"Preparing the measurement", Bluetooth
Step 2: "beurer Health Manager" app
In the "beurer Health Manager" app, add the
BM 54 under "Settings/My devices".
Step 3: BM 54
Take a measurement.
Step 4: BM 54
Data transfer at a later point:
• Go to memory mode (chap-
data trans-
ter 7). Select the desired
®
user memory. The Blue-
tooth
matically.
.
).
®
transfer starts auto-
®

Advertisement

Chapters

Table of Contents
loading

Table of Contents