Displaying And Deleting Measured Values - Beurer BM 45 Instructions For Use Manual

When assessing your blood pressure, only use the results
that have been recorded without any irregularities in your
pulse.
Consult your doctor if
can determine, through an examination, whether there is an
abnormality.
Risk indicator
Measured blood
pressure value range
Classification
Systolic Diastolic
(in mmHg) (in mmHg)
Stage 3 high blood
≥ 180 ≥ 110
pressure (severe)
Stage 2 high blood
160 – 179 100 – 109
pressure (moderate)
Stage 1 high blood
140 – 159 90 – 99
pressure (mild)
130 – 139 85 – 89 High normal
120 – 129 80 – 84 Normal
< 120 < 80 Optimal
Source:
is displayed frequently. Only they
Risk
indicator
colour
Red
Orange
Yellow
Green
Green
Green
The risk indicator /
8 19
corded blood pressure values fall into. If the measured values
are in two different categories (e.g. systolic pressure in the
"high normal" range and diastolic pressure in the "normal"
range), the risk indicator always indicates the higher range –
"high normal" in the example described.
Note that these default values are for general guidance
only, as individual blood pressures may vary.
Please note that self-measurement at home usually results
in values lower than those recorded at a doctor's surgery.
Consult your doctor at regular intervals. Only they are able to
give you personal target values for controlled blood pressure,
particularly if you are receiving medical therapy.
6.5 Displaying and deleting measured
values
User
The results of every successful measurement are saved with
the date and time. If there are more than 60 measurements,
the oldest measurements are deleted.
36
indicates which category the re-