Table of Contents
Advertisement
Warning
If you repeatedly obtain measurement results with the control solution that are
outside of the specified range, refrain from using the system to determine your
blood sugar content. Please contact customer service.
7 The Measured Value Memory
Your blood pressure or blood sugar level is automatically stored with every mea-
surement. Exception: During a blood sugar measurement with control solution,
"CTL" was activated.
The measured value memory can store up to a maximum of 480 values. Once
this number is reached, the measured value always replaces the oldest value in
the memory. You can retrieve each individual blood pressure/blood sugar meas-
ured value. For the blood sugar levels, you can calculate and display the average
value for the last 7, 14, 21, 28, 60 and 90 days.
Note
• If measured values are already stored in the memory and you then reset the
date, the average values are calculated according to the new time period.
• "---" indicates that the measured value memory is empty. "OFF" is then dis-
played briefly and the measuring device switches off automatically.
7.1
Displaying individual values
The individual values of the last 480 measurements are displayed. The unit dis-
plays blood pressure and blood sugar levels in mixed order. The determining
factor for the order is always the time of measurement. The most recent value is
displayed first, and the oldest value is displayed last. At the same time, the mea-
suring device displays the date and time of the measurement in alternation.
42
Beurer BGL60 mg/dL
Advertisement
Table of Contents
