Table of Contents
Advertisement
1
The measuring device must be switched off. Press the memory button [M].
2
The start display appears briefly.
"01" is briefly displayed (Fig. 1) and then the individual value of the last blood
pressure or blood sugar measurement (Fig. 2). The display of date and time
alternate automatically (Fig. 3).
Fig. 1
3
Every time you press the
pears. Pressing the
a maximum of 480 previous measured values.
After the last available individual value, the most recent measured value is
displayed again.
4
You can cancel the process at any time. To do so, press the ON/OFF button
or wait until the unit switches off automatically after 3 minutes.
7.2
Displaying average blood sugar levels
You can display the average blood sugar value from the last 7, 14, 21, 28, 60 and
90 days. The measuring device also displays how often you measured your blood
sugar during the period selected.
1
The measuring device must be switched off. Hold down the memory button
[M] until the 7-day average is displayed after a brief appearance of the start
display.
Beurer BGL60 mg/dL
Date
Fig. 2
button again, the previous measured value ap-
/SET button displays the newer value. You can display
SYS
mmHg
DIA
Fig. 3
Time
SYS
mmHg
DIA
43
Advertisement
Table of Contents
