Configuring Quota Mode - HIKVISION DS-7108NI User Manual

User Manual of WIFI Network Video Recorder

12.2 Configuring Quota Mode

Purpose:
Each camera can be configured with allocated quota for the storage of recorded files.
Steps:
1. Enter the Storage Mode interface.
Menu > HDD > Advanced
2. Select a Camera to configure quota parameters.
3. Input the capacity in the text fields of Max. Record Capacity (GB).
4. Repeat the steps above to configure for other cameras.
Or copy the current camera settings to other cameras by clicking the Copy button to enter the Copy Camera
menu, as shown in Figure 12. 7.
5. Click the OK button to save the settings and back to the Storage Mode interface.
6. Click the Apply button to apply the settings.
If the quota capacity is set to 0, then all cameras will use the total capacity of HDD for record.
Figure 12. 6 Storage Mode Settings Interface
Figure 12. 7 Copy Settings to Other Camera(s)
152