Table of Contents
Advertisement
User Manual of WIFI Network Video Recorder
8.7 Triggering or Clearing Alarm Output
Manually
Purpose:
Sensor alarm can be triggered or cleared manually. If Manually Clear is selected in the drop-down list of dwell
time of an alarm output, the alarm can be cleared only by clicking Clear button in the following interface.
Steps:
1. Select the alarm output you want to trigger or clear and make related operations.
Menu > Manual > Alarm
2. Trigger / clear an alarm output.
1)
Click to select an Alarm Output No..
2)
Click Trigger or Clear to trigger or clear the alarm output.
3. Click Trigger All to trigger all and click Clear All to clear all alarm outputs.
Figure 8. 19 Clear or Trigger Alarm Output Manually
106
Hide quick links:
Advertisement
Table of Contents
