Configuring General Settings - HIKVISION DS-7108NI User Manual

User Manual of WIFI Network Video Recorder

11.1 Configuring General Settings

Purpose:
Network settings must be properly configured before you operate NVR over network.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the General tab.
3. In the General Settings interface, you can configure the following settings: NIC Type, IPv4 Address, IPv4
Gateway, MTU and DNS Server.
 The valid value range of MTU is 500 ~ 9676.
 If the DHCP server is available, you can check the checkbox of Enable DHCP to automatically obtain
an IP address and other network settings.
4. Click Apply button to save the settings.
Figure 11. 1 Network Settings Interface
129