User Manual of WIFI Network Video Recorder
14.5 Upgrading System
Purpose:
The firmware on your NVR can be upgraded by local backup device or remote FTP server.
14.5.1 Upgrading by Local Backup Device
Before you start:
Connect your NVR with a local backup device where the update firmware file is located.
Steps:
1. Enter the Upgrade interface.
Menu > Maintenance > Upgrade
2. Click the Local Upgrade tab to enter the local upgrade menu, as shown in Figure 14. 8.
3. Select Device Name and File Type you want to show in respective dropdown lists.
The default File Type is *.dav and *.mav.
4. Click to select the update file in the backup device.
5. Click Upgrade to start upgrading.
6. After the upgrading is complete, reboot the NVR to activate the new firmware.
14.5.2 Upgrading by FTP
Purpose:
Ensure the network connection of the PC (running FTP server) and the device is valid and correct. Run the FTP
server on the PC and copy the firmware into the corresponding directory of your PC.
Figure 14. 8 Local Upgrade Interface
168