Calling Linear Scan; One-Touch Park - HIKVISION DS-7108NI User Manual

User Manual of WIFI Network Video Recorder
Left Limit or Right Limit button to link the location to the corresponding limit.
The speed dome starts linear scan from the left limit to the right limit, and you must set the left limit on
the left side of the right limit, as well the angle from the left limit to the right limit should be no more
than 180º .

4.3.8 Calling Linear Scan

Purpose:
Follow the procedure to call the linear scan in the predefined scan range.
Steps:
1. Enter PTZ Control interface. For details, please refer to 4.2 PTZ Control Panel.
2. Click the button to show the one-touch function of the PTZ control.
3. Click Linear Scan button to start the linear scan and click the Linear Scan button again to stop it.
You can click the Restore button to clear the defined left limit and right limit data and the dome needs to
reboot to make settings take effect.

4.3.9 One-touch Park

Purpose:
For some certain model of the speed dome, it can be configured to start a predefined park action (scan, preset,
patrol and etc.) automatically after a period of inactivity (park time).
Steps:
1. Enter PTZ Control interface. For details, please refer to 4.2 PTZ Control Panel.
2. Click the button to show the one-touch interface.
Figure 4. 12 PTZ Panel - One-touch
48