Detecting Video Tampering Alarm - HIKVISION DS-7108NI User Manual

User Manual of WIFI Network Video Recorder

8.4 Detecting Video Tampering Alarm

Purpose:
Trigger alarm when the lens is covered and take alarm response action(s).
Steps:
1. Enter Video Tampering interface.
Menu > Camera > Video Tampering
2. Select the Camera in the drop-down list.
3. Check the checkbox of Enable Video Tampering Detection.
4. Drag the scroll bar to set the Sensitivity.
5. Use the mouse to draw an area in the right live view window to detect video tampering.
6. Click button to configure handling action.
7. Set Arming Schedule parameters.
1) Click Arming Schedule tab.
2) Choose one day of a Week. Up to eight periods can be set within each day.
3) Click Apply button to save the settings.
Time periods cannot be repeated or overlapped.
Figure 8. 12 Set Arming Schedule of Video Tampering
Figure 8. 11 Video Tampering Setup Interface
100