Starting Up And Shutting Down The Nvr - HIKVISION DS-7108NI User Manual

User Manual of WIFI Network Video Recorder

2.1 Starting Up and Shutting Down the NVR

Purpose:
Proper startup and shutdown procedures are crucial to expanding the life of the NVR.
Before you start:
1. Establish the connection between the NVR and Internet via the WAN interface.
2. Check that the voltage of the extra power supply is the same with the NVR's requirement, and the ground
connection is working properly.
Starting up the NVR:
Step:
Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an Uninterruptible
Power Supply (UPS) be used in conjunction with the device.
During the starting up program, a splash screen appears on the monitor.
Shutting down the NVR
Steps:
1. Enter the Shutdown menu.
Menu > Shutdown
2. Click the Shutdown button.
3. Click the Yes button.
4. Unplug the power supply when the attention pops up.
Rebooting the NVR
In the Shutdown menu, you can also reboot the NVR.
Steps:
1. Enter the Shutdown menu by clicking Menu > Shutdown.
2. Click the Logout button to lock the NVR or the Reboot button to reboot the NVR.
Figure 2. 1 Shutdown Menu
Figure 2. 2 Shutdown Attention
16