User Manual of WIFI Network Video Recorder
12.3 Checking HDD Status
Purpose:
You may check the status of the installed HDDs on NVR so as to take immediate check and maintenance in case
of HDD failure.
Checking HDD Status in HDD Information Interface
Steps:
1. Enter the HDD Information interface.
Menu > HDD > General
2. Check the status of each HDD which is displayed on the list, as shown in Figure 12. 8.
If the status of HDD is Normal, it works normally. If the status is Uninitialized or Abnormal, please initialize the
HDD before use. And if the HDD initialization is failed, please replace it with a new one.
Checking HDD Status in HDD Information Interface
Steps:
1. Enter the System Information interface.
Menu > Maintenance > System Info
2. Click the HDD tab to view the HDD status, as shown in Figure 12. 9.
Figure 12. 8 View HDD Status (1)
Figure 12. 9 View HDD Status (2)
153