Configuring Motion Detection Recording - HIKVISION DS-7108NI User Manual

User Manual of WIFI Network Video Recorder

5.3 Configuring Motion Detection Recording

Purpose:
In the live view mode, once a motion detection event takes place, the NVR can analyze it and do many actions to
handle it. Enabling motion detection function can trigger certain channels to start recording, or trigger full screen
monitoring, audible warning, notify the surveillance center and so on. In this chapter, you can follow the steps to
schedule a record which triggered by the detected motion.
Steps:
1. Enter the Motion Detection interface.
Menu > Camera > Motion
2. Configure Motion Detection.
1) Choose camera to configure.
2) Check the checkbox of Enable Motion Detection.
3) Use the mouse to drag and draw the motion detection area in the right live view window.
If you want to set the motion detection for all the area shot by the camera, click Full Screen.
To clear the motion detection area, click Clear.
4) Click Settings, and the message box for channel information pop up.
5) Select the channels which you want the motion detection event to trigger recording.
Figure 5. 9 Motion Detection- Mask
Figure 5. 10 Motion Detection Settings
56