Operations In Live View Mode; Using The Mouse In Live View - HIKVISION DS-7108NI User Manual

User Manual of WIFI Network Video Recorder

3.2 Operations in Live View Mode

In live view mode, there are many functions provided. The functions are listed below.
•
Single Screen: showing only one screen on the monitor.
•
Multi-screen: showing multiple screens on the monitor simultaneously.
•
Auto-switch: the screen is auto switched to the next one. And you must set the dwell time for each screen on
the configuration menu before enabling the auto-switch.
Menu>Configuration>Live View>Dwell Time.
•
Start Recording: continuous record and motion detection record are supported.
•
Output Mode: select the output mode to Standard, Bright, Gentle or Vivid.
•
Playback: playback the recorded videos for current day.
•
PTZ Control: enter PTZ control interface to rotate the PTZ.
•
Add IP Camera: the shortcut to the IP camera management interface.

3.2.1 Using the Mouse in Live View

Name
Menu
Single Screen
Multi-screen
Previous Screen
Next Screen
Start/Stop Auto-switch
Start Recording
Add IP Camera
Playback
PTZ Control
Output Mode
The dwell time of the live view configuration must be set before using Start Auto-switch.
Table 3. 2 Mouse Operation in Live View
Description
Enter the main menu of the system by right-clicking the mouse.
Switch to the single full screen by choosing channel number from the drop-down
list.
Adjust the screen layout by choosing from the drop-down list.
Switch to the previous screen.
Switch to the next screen.
Enable/disable the auto-switch of the screens.
Start continuous recording or motion detection recording of all channels.
Enter the IP Camera management interface, and manage the cameras.
Enter the playback interface and start playing back the video of the selected
channel immediately.
Enter PTZ control interface to rotate the PTZ to desired view.
Four modes of output supported, including Standard, Bright, Gentle and Vivid.
33