Configuring Parameters - HIKVISION DS-7108NI User Manual

User Manual of WIFI Network Video Recorder

5.1 Configuring Parameters

Purpose:
By configuring the parameters you can define the parameters which affect the image quality, such as the
transmission stream type, the resolution and so on.
Before you start:
1. Make sure that the HDD has already been installed. If not, please install a HDD and initialize it. (Menu >
HDD > General)
2. Check the storage mode of the HDD.
1) Click Advanced to check the storage mode of the HDD.
2) Please set the maximum record capacity For detailed information, see 12.1 Configuring Quota Mode.
Steps:
1. Enter the Record settings interface to configure the recording parameters.
Menu > Record > Parameters
2. Parameters Setting for Recording
1) Select Record tab page to configure. You can configure the stream type, the resolution, and other
parameters on your demand.
2) Click the More Settings button to set the advanced parameters for recording and then click OK button to
finish editing.
Figure 5. 1 HDD- General
Figure 5. 2 Recording Parameters
51