Table of Contents
Advertisement
(Figure 8-15)
BDA TELE SSC 1 11_08 D.indd 40
>
Highlight now the row Download via Satellite with
the help of up/down buttons.
The menu Download via Satellite appears. (Figure 8-15)
>
Set the antenna in this row with the left/right
arrow buttons, via which you are receiving the
satellite ASTRA 19.2°.
>
Highlight the row Download Type with the
up/down buttons. You can do here the
following settings.
Software
Select this entry to update only the operating
software. The channel list remains intact.
>
Set the software with the left/right arrow buttons.
>
Confirm with OK. It is now checked whether a
new software is available for your receiver. If
this is the case, then it is downloaded
automatically. Please pay attention to the on-
screen messages displayed.
Data
Select this entry to update only the channel list.
>
Set Data with the left/right arrow buttons.
>
Confirm with OK. It is now checked whether a
new channel list is available for your receiver. If
this is the case, then it is downloaded
automatically. Please pay attention to the on-
screen messages displayed.
Software + Data
Select this entry to update the software as well as the
channel list.
>
Set Software + Data with the left/right arrow
buttons.
>
Confirm with OK. It is now checked whether a
new software and channel list are available for
your receiver. If this is the case, then they are
downloaded automatically. Please pay attention
to the on-screen messages displayed.
In case the parameters of the data channel for
downloading the software update have changed, you
can correct them in the menu. In normal cases there
should be no need for you to make changes in this
menu.
>
To modify the data of the data channel,
highlight the row Mode with the up/down arrow
buttons.
0
01.01.1970 2:46:3 Uhr
Advertisement
Table of Contents
