Timer; Programming The Timer - Telestar SSC 1 Instructions For Use Manual

If detailed information is available for a programme, it
is symbolised below the date and time display with a
blue point having the legend Detail.
> If available, the detailed information for the
selected programme is shown by pressing the
blue button (Figure 7-9).
> To exit the detailed information, press the button
Exit.
> Press the Exit button again to return to the
normal mode.

7.11 Timer

Your receiver has a timer. With the help of this you
can programme up to 10 events for switching on and
off the receiver.
> Call the main menu with the Menu button.
> Highlight the row Timer with the up/down arrow
buttons.
> Confirm by pressing OK.
> Select now the row Timer reservation with the
up/down arrow buttons.
> Press the OK button to open the menu for time
reservation (Figure 7-10) .

7.11.1 Programming the timer

Proceed as follows to programme a timer event:
Timer number
> Highlight the row Timer number with the arrow
buttons.
> Set a timer event between 1 and 10 with the help
of the left/right arrow buttons.
Switch-on channel
> Highlight the row Switch-on Channel with the
arrow buttons.
> Call the channel list by pressing the OK button.
> You can switchover between the lists of TV and
radio programmes with the TV/Radio button.
> Select the programme with the arrow buttons
left/right or the buttons Page up/down, for which
you want to programme a timer event.
> Confirm with OK.
BDA TELE SSC 1 11_08 D.indd 25
(Figure 7-9)
(Figure 7-10)
01.01.1970 2:45:53 Uhr