Table of Contents
Advertisement
This only needs to be corrected with respect to your
local time. For Germany, this time difference is +1
h o u r .
>
Open the main menu with the Menu button.
>
Select now the menu row Timer by
highlighting it with the up/down buttons and
pressing OK. A window now opens with the
options available in the Installation menu
(Figure 6-9).
>
Select now the menu option Time with the arrow
buttons and confirm it with OK. Figure 6.10
now opens.
6.3.1 Setting the local time
>
Enter in this row the difference between your
local time and GMT with the help of the
right/left buttons.
6.3.2 Summer time
>
In this row select the switchover to the summer
time with the right/left arrow buttons.
6.3.3 Date and time
>
If the date and time are not being shown
correctly, you can set them manually in
these rows with the help of the right/left
and the numeric buttons. With the up/down
buttons you can select year, month, date
and hour.
>
To exit the Timer menu, press the Exit button
thrice.
6.4 Antenna configuration
After you have set your receiver as you want, you can
now also set the receiver to your antenna, if needed.
Ex-factory your receiver is pre-programmed to
ASTRA and EUTELSAT with Universal-LNB (see
Annexure for technical terms). These channels are
received after the start-up without any further
settings.
If you wish to receive other satellites or use a
different LNB, set your receiver to your desired data
as follows:
>
Open the main menu with the Menu button.
(Figure 6-11)
>
Highlight the row user installation with the
up/down arrow button .
BDA TELE SSC 1 11_08 D.indd 15
(figure 6-9)
(Figure 6-10)
(Figure 6-11)
1
01.01.1970 2:45:38 Uhr
Advertisement
Table of Contents
