Table of Contents
Advertisement
>
To actually delete the transponder set in the
menu Channel Search, confirm the query that
follows with OK.
8.2.5.2 Entering the satellite name
You can change the name of any satellite according to
your wishes.
>
Open the menu Channel Search as described in
the Point 8.3.
>
Set the name of the satellite in the row Satellite,
whose name you want to change.
>
Press OK to open the keypad dialogue for
entering the new name.
>
Enter the name of the satellite in the keypad
dialogue as described under 8.1.5.
Press the EXIT button several times to return to the
normal mode.
8.3 Factory setting
You can revert back to the factory settings at any time.
By calling this function the factory settings are restored
again and your own settings are deleted.
>
Open the Main Menu with the Menu button.
(Figure 8-14).
>
Select now the menu row User Installation by
highlighting it with the up/down arrow buttons.
>
Confirm with OK.
>
Highlight now the row Factory Settings with the
up/down arrow buttons.
>
Confirm with OK.
>
To restore the factory settings, highlight the
line OK with the up/down buttons and confirm
with OK.
8.4 Software update
Furthermore, you can also update the operating
software and the channel list of your receiver via
satellite (ASTRA 19° East).
>
Open the Main Menu with the Menu button.
>
Select now the option User Installation by
highlighting it with the up/down buttons.
>
Confirm with OK.
BDA TELE SSC 1 11_08 D.indd 39
(Figure 8-14)
01.01.1970 2:46:2 Uhr
Advertisement
Table of Contents
