Table of Contents
Advertisement
1
2
3
6
9
8
7
(Figure 7-5)
BDA TELE SSC 1 11_08 D.indd 22
7.2.5 Info-box
Each time you change the channel a small info-box
4
appears (Figure 7-5) with the channel properties,
such as channel number (1), channel name (2), title of
the programme (3), date (4) and time (5). In addition,
further properties are also shown, such as video text
5
(6), subtitles (7), different audio channels (8) (e.g.
multilingual films or different radio stations),
encrypted channel (9).
7.3 Volume control
You can control the volume of your receiver. This
simplifies the handling of the receiver, because you
thus have all the important functions on one
receiver and seldom need to use the remote
control of your television set. After switching on
the receiver, the sound is reproduced with the
volume last set.
>
Control the volume of the receiver with the
button Volume + louder and the button
Volume - softer.
>
Upon pressing the button Sound on/off the sound
is muted and upon pressing it again the sound
comes back.
7.4 Selecting a different language
If a programme is broadcast in several languages or
with several sound channels (see 7.2.5 Info-box), you
can set a different language or a different sound
channel as follows:
>
Press the red button several times in normal
operation, till the desired language appears
on the screen.
You can now listen to the channel in the set
language. The reception of mono-channels is also
possible with your receiver.
>
By pressing the blue button several times you
can choose from left, right and stereo.
7.5 TV/Radio switchover
The pre-programming also contains radio programmes
along with television programmes.
>
Switch the receiver in the radio mode with the
button TV/Radio.
The receiver now switches to the last radio
programme heard.
01.01.1970 2:45:51 Uhr
Advertisement
Table of Contents
