Table of Contents
Advertisement
>
Select the row First language with the up/down
button.
>
Press OK to open a window with the available
languages.
>
Highlight the desired language with the
arrow buttons.
>
Confirm your selection with OK.
>
Highlight the row OK and confirm it by pressing
OK to save your settings.
6.1.3 LNB vol t a ge
In this menu option you can switch on and off the LNB
voltage with the help of the right/left arrow buttons.
6.1.4 Picture format
Set the picture format of your TV set as 4:3, 4:3 Letter
box or 16:9 with the help of right/left arrow buttons.
With this function the picture format is adjusted
automatically to your TV-set. In case of the setting 4:3
Letterbox the picture, being transmitted in the 16:9
format, is shown without both the two black bars at the
upper and lower margin of the screen.
6.1.5 Video output
Set FBAS or RGB in this row according to your TV set
with the right/left arrow buttons
6.1.6 Standby time
Set the time in this row, after which the device
automatically switches to passive standby.
6.1.7 TV-device model
Set PAL or NTSC in this row with the help of the arrow
buttons.
6.1.8 Starting channel
You can set the channel here, which your receiver
should display after being switched on.
>
Highlight the row starting channel with the
up/down buttons and press OK.
A query now appears, whether you really want to
activate the starting channel.
>
Highlight the row OK and press the button OK
again to open a window for selecting a starting
channel (Figure 6-5).
>
You can now select a starting channel here with the
up/down arrow buttons and accept with the OK
button.
>
In order that your receiver starts with the channel
last set, highlight the row Cancel and confirm it
with OK.
1
(Figure 6-5)
Advertisement
Table of Contents
