Configuring Channel Lists - Telestar SSC 1 Instructions For Use Manual

Table of Contents

Advertisement

(Figure 8-1)
(Figure 8-2)
(Figure 8-3)
BDA TELE SSC 1 11_08 D.indd 28

8.1 Configuring channel lists

This chapter describes how you can change the pre-
programming of your receiver and the favourite
programmes list as per your wishes. This function is
also needed to sort the newly found programmes in a
list after a search.
You should be aware of the following here: Your device
has the complete list and the different favourites lists.
The favourites programmes list contain all programmes,
which you have included as described below. All the
available programmes are present in the complete list.
This chapter also describes how you can delete
programmes or safeguard them by using the child lock.
Proceed as follows to edit the programme lists:
>
Call the main menu with the Menu button (Figure
8-1)
>
Highlight the row Programme management with the
up/down buttons.
>
Confirm with OK.
>
Select with the up/down buttons, whether you
wish to edit the TV or the radio programmes.
>
Confirm your selection with OK.
The programme management appears for editing
the respective programme lists (TV or radio
lists). (Figure 8-2)
In the left half of the screen you see the picture
of the current programme as PIG and the related
data. In the right half you see the complete list, in
which the currently ongoing programme is
highlighted. The currently active favourites list is
shown in the header line of the complete list.
8.1.1 Sorting the programmes
Manual sorting
You can sort the programmes of the complete list
according to your wishes.
>
The entry Move (Figure 8-3) appears in the
header line of the complete list when you press
the yellow button.
>
Highlight the programme, which you want to
move to a different place with the help of the
buttons up/down or Page up/down.
01.01.1970 2:45:55 Uhr

Advertisement

Table of Contents
loading

Table of Contents