Table of Contents
Advertisement
(Figure 7-1)
BDA TELE SSC 1 11_08 D.indd 20
Channel up/down on the receiver or on the remote
control by one channel space up or down.
7.2.2 With the help of numeric keypad
>
Enter the desired channel number with the help of
the numeric keypad.
For example:
1
1,
then 4
2,
then 3,
While entering the multi-digit channel numbers you
have about 2 seconds time after pressing a button, in
order to complete your input.
If you wish to enter a single or a two-digit number,
then you can accelerate the switching process by
pressing the OK button after entering the last digit.
7.2.3 With the help of channel lists
To simplify the calling of channels, your device has
various channel lists. All the channels present in the
receiver are present in the complete list. Further, your
receiver also has 6 different favourites lists, (see Point
8.1.4) in which only selected channels are present. The
channels can also be displayed sorted on the satellites.
7.2.3.1 Calling channels with the help of complete list
Proceed as follows to select a channel from the
complete list:
>
Press the button OK.
A channel list now appears. In the TV-mode
only the TV and radio programmes appear.
The channel currently set is highlighted.
(Figure 7-1)
>
You can now highlight the desired channel
with the up/down arrow buttons.
>
The highlighted channel is set by pressing the OK
button.
>
The up/down arrow buttons help you to move
the marker by one row in the list.
>
With the buttons Page up/down you can move
by one page up and down respectively in the
list.
>
The channel list is faded out upon pressing the
button Exit.
0
for channel No. 1
for channel No. 14
then 4 for channel No. 234
01.01.1970 2:45:49 Uhr
Advertisement
Table of Contents
