Related Manuals for Telestar SSC 1
Summary of Contents for Telestar SSC 1
- Page 1 Instructions for use TELESTAR SSC 1 BDA TELE SSC 1 11_08 D.indd 1 01.01.1970 2:44:50 Uhr...
-
Page 2: Table Of Contents
6 .4 .9 C/Ku band control ..... . . 18 6 .4 .10 Calculate azimuth and elevation..18 BDA TELE SSC 1 11_08 D.indd 2 01.01.1970 2:44:51 Uhr... - Page 3 ....48 Your device bears the CE-logo and fulfils all the necessary EU-standards. Changes and printing errors reserved. Status 11/08 Duplication and reproduction only with the permission of the publisher. BDA TELE SSC 1 11_08 D.indd 3 01.01.1970 2:44:51 Uhr...
-
Page 4: Figures
00 49-65 95-9003004 You can also send an e-mail to service@telestar.de or a fax to 0049-65 95-9 003 003. In case your problem is not solved in this way, please return the device to our service centre at the following address: For Germany: TELESTAR Service Centre, Vulkanhöhe/An der B 410, D 54552-Dreis-Brück... - Page 5 Mains supply Remote control sensor LNB-input BDA TELE SSC 1 11_08 D.indd 5 01.01.1970 2:45:10 Uhr...
-
Page 6: Please Read First
Please make sure that the empty batteries of the remote control as well as the electronic waste is not thrown in the household garbage, but instead are disposed off properly (return to the dealer, special waste). BDA TELE SSC 1 11_08 D.indd 6 01.01.1970 2:45:11 Uhr... -
Page 7: Safety Instructions
2004/108/EC as well as to the directive for low-voltage devices 2006/95/EC. Non-required time The device should be disconnected from the mains during a thunderstorm or during longer non-required time (e.g. vacation). BDA TELE SSC 1 11_08 D.indd 7 01.01.1970 2:45:13 Uhr... -
Page 8: Disposal Of Electrical And Electronic Devices
Connecting the LNB with the LNB-input (LNB IN) of the DVB- receiver. c. Connecting the DVB-receiver with the remote control sensor of the Scart-connection to the TV-set. Rear-side of TV BDA TELE SSC 1 11_08 D.indd 8 01.01.1970 2:45:30 Uhr... -
Page 9: Connection
If your TV-set is equipped accordingly, then upon switching on the digital receiver, it will switch automatically to AV and hence to Sat-operation. BDA TELE SSC 1 11_08 D.indd 9 01.01.1970 2:45:31 Uhr... -
Page 10: First Installation
Press OK. A window opens with the available satellites. > Select the satellite with the arrow buttons up/down or page up/down, which you receive with the DiSEqC-setting position B/option A and confirm with OK. BDA TELE SSC 1 11_08 D.indd 10 01.01.1970 2:45:32 Uhr... -
Page 11: Station Search
6 S e t t i n g s After you have connected and started your new receiver, you can optimise the receiver for your usage, if necessary. BDA TELE SSC 1 11_08 D.indd 11 01.01.1970 2:45:32 Uhr... -
Page 12: Basic Settings
6.1 Basic settings To be able to use your DVB-receiver optimally, you should set it to your individual usage. > Open the main menu on the screen with the menu button. (Figure 6-1). > Select now the menu row Installation by highlighting it with the up/down arrow button. - Page 13 BDA TELE SSC 1 11_08 D.indd 12 01.01.1970 2:45:34 Uhr...
-
Page 14: Lnb Voltage
> Select the row First language with the up/down button. > Press OK to open a window with the available languages. > Highlight the desired language with the arrow buttons. > Confirm your selection with OK. > Highlight the row OK and confirm it by pressing OK to save your settings. - Page 15 BDA TELE SSC 1 11_08 D.indd 13 01.01.1970 2:45:35 Uhr...
-
Page 16: Child Lock
Press the EXIT button twice to completely exit the menu. (Figure 6-8) 6.3 Setting the time Your device is equipped with a clock. This can be synchronised to Greenwich Mean Time via Sat- reception . BDA TELE SSC 1 11_08 D.indd 14 01.01.1970 2:45:37 Uhr... -
Page 17: Setting The Local Time
LNB, set your receiver to your desired data as follows: > Open the main menu with the Menu button. (Figure 6-11) > Highlight the row user installation with the up/down arrow button . (Figure 6-11) BDA TELE SSC 1 11_08 D.indd 15 01.01.1970 2:45:38 Uhr... -
Page 18: Antenna
Save the east border with OK. The row West demarcation is now highlighted. > Rotate the reflector now by pressing the right- arrow button to the maximum possible or the desired west-position. BDA TELE SSC 1 11_08 D.indd 16 01.01.1970 2:45:39 Uhr... -
Page 19: Satellite
LNB frequency 2 to be set from the list and confirm with OK. > Press the button Exit after you have made all the settings. > To save the settings, confirm the query that now appears with OK. BDA TELE SSC 1 11_08 D.indd 17 01.01.1970 2:45:39 Uhr... -
Page 20: 22 Khz Sound
Your receiver offers you the option for calculating these values. > Open the menu Antenna Configuration as described in Point 6.4. > Press the red button for Antenna alignment help. BDA TELE SSC 1 11_08 D.indd 18 01.01.1970 2:45:48 Uhr... -
Page 21: Operation
During operation the LED on the receiver glows in green, during standby in red. 7.2 Channel selection 7.2.1 With the help of Channel up/down buttons > Switch the channels with the help of the buttons BDA TELE SSC 1 11_08 D.indd 19 01.01.1970 2:45:48 Uhr... -
Page 22: With The Help Of Numeric Keypad
With the buttons Page up/down you can move by one page up and down respectively in the list. > The channel list is faded out upon pressing the button Exit. BDA TELE SSC 1 11_08 D.indd 20 01.01.1970 2:45:49 Uhr... - Page 23 Enter your password with the help of the numeric keypad . The desired channel is now set. > Switch to a channel that is not locked. Please read 8.1.3 for locking a channel. BDA TELE SSC 1 11_08 D.indd 21 01.01.1970 2:45:50 Uhr...
-
Page 24: Info-Box
The pre-programming also contains radio programmes along with television programmes. > Switch the receiver in the radio mode with the button TV/Radio. The receiver now switches to the last radio programme heard. BDA TELE SSC 1 11_08 D.indd 22 01.01.1970 2:45:51 Uhr... -
Page 25: Transponder Info
Press the button Exit to come back to the normal mode. 7.9 Sub-titles Some broadcasters also transmit the subtitles. Proceed as follows to activate the display of the sub-titles: BDA TELE SSC 1 11_08 D.indd 23 01.01.1970 2:45:51 Uhr... - Page 26 EPI window. > With the green or the yellow button you can move the marker 6 hours before or after respectively . BDA TELE SSC 1 11_08 D.indd 24 01.01.1970 2:45:52 Uhr...
-
Page 27: Timer
TV/Radio button. > Select the programme with the arrow buttons left/right or the buttons Page up/down, for which you want to programme a timer event. > Confirm with OK. BDA TELE SSC 1 11_08 D.indd 25 01.01.1970 2:45:53 Uhr... - Page 28 Highlight the row Time with the up/down buttons. > Set the four-digit time with the number keys, at which the timer event should take place. Duration > Highlight the row Duration with the up/down buttons. BDA TELE SSC 1 11_08 D.indd 26 01.01.1970 2:45:53 Uhr...
-
Page 29: Rotating The Antenna Manually (Rotating System)27
8 C h a n g in g base programming Ex-factory the device is preset with a base programming, which contains the programmes of ASTRA 19.2° East, EUTELSAT 13° East and TÜRKSAT. BDA TELE SSC 1 11_08 D.indd 27 01.01.1970 2:45:54 Uhr... -
Page 30: Configuring Channel Lists
> Highlight the programme, which you want to move to a different place with the help of the buttons up/down or Page up/down. (Figure 8-3) BDA TELE SSC 1 11_08 D.indd 28 01.01.1970 2:45:55 Uhr... - Page 31 Highlight the criterion with the up/down buttons e.g. programme name, on which the complete list is to be sorted. > Press the OK button. The complete list is sorted on the selected criterion . BDA TELE SSC 1 11_08 D.indd 29 01.01.1970 2:45:55 Uhr...
- Page 32 Call the menu for Programme management as described under Point 8.1. > Upon pressing the red button several times the entry Delete Satellite now appears in the header line of the complete list. BDA TELE SSC 1 11_08 D.indd 30 01.01.1970 2:45:56 Uhr...
- Page 33 (Figure 8-6). If the child lock is already active as described in 6 .2, first the password must be entered with the help of the numeric keypad. (Figure 8-6) BDA TELE SSC 1 11_08 D.indd 31 01.01.1970 2:45:56 Uhr...
- Page 34 You can rename the favourites list the way you want. Proceed as follows to rename a favourites list as “Sport”, which, for instance, contains only sports channels: > Call the menu for Programme management as described in Point 8.1. BDA TELE SSC 1 11_08 D.indd 32 01.01.1970 2:45:57 Uhr...
-
Page 35: Channel Search
Select this search to search for a selected satellite or to search all the set satellites for channels. 2. Network search Select this search to search for channels of a selected network. BDA TELE SSC 1 11_08 D.indd 33 01.01.1970 2:45:58 Uhr... -
Page 36: Transponder Search
When using a rotating system, you can also set the search type Search All. In this type of search all the satellites being received by the rotating system are searched for channels. BDA TELE SSC 1 11_08 D.indd 34 01.01.1970 2:45:59 Uhr... - Page 37 Point 6.4. Please pay attention to Point 8.2.6 if using a rotating system Transponder Your receiver is pre-programmed with the transponder data of the most common satellites. BDA TELE SSC 1 11_08 D.indd 35 01.01.1970 2:46:00 Uhr...
- Page 38 > Set the search type Transponder with the left/right arrow buttons. > Press OK to start the search. Pay attention to the on-screen messages being shown. BDA TELE SSC 1 11_08 D.indd 36 01.01.1970 2:46:00 Uhr...
-
Page 39: After The Search
After completing the search the number of transponders searched and the channels found are shown (Figure 8-13). The channels are included automatically in the complete list. BDA TELE SSC 1 11_08 D.indd 37 01.01.1970 2:46:01 Uhr... -
Page 40: Further Options
Delete transponder You can delete a transponder, if its data are no longer valid. > Highlight the row Delete TP with the up/down buttons and confirm with OK . BDA TELE SSC 1 11_08 D.indd 38 01.01.1970 2:46:01 Uhr... -
Page 41: Factory Settings
(ASTRA 19° East). > Open the Main Menu with the Menu button. > Select now the option User Installation by highlighting it with the up/down buttons. > Confirm with OK. BDA TELE SSC 1 11_08 D.indd 39 01.01.1970 2:46:2 Uhr... - Page 42 > To modify the data of the data channel, highlight the row Mode with the up/down arrow buttons. BDA TELE SSC 1 11_08 D.indd 40 01.01.1970 2:46:3 Uhr...
-
Page 43: Receiver Information
Confirm by pressing OK. A window now (Figure 8-16) opens with the receiver information. (Figure 8- 17). > Return to the normal mode by pressing the Exit button twice. (Figure 8-17) BDA TELE SSC 1 11_08 D.indd 41 01.01.1970 2:46:4 Uhr... -
Page 44: Technical Terms
Receiver: Intermediate frequency or 1.ZF 950 till 2150 MHz. Unit Name Vibrations per second 1 Hz 1 Hertz 1 kHz 1 Kilohertz 1,000 1 MHz 1 Megahertz 1,000,000 1 GHz 1 Gigahertz 1,000,000,000 BDA TELE SSC 1 11_08 D.indd 42 01.01.1970 2:46:04 Uhr... - Page 45 TV. SCART: Plug connector at television sets, video recorders, satellite receivers and other devices for entertainment electronics for transmitting audio (sound) and video (image) signals (AV). BDA TELE SSC 1 11_08 D.indd 43 01.01.1970 2:46:05 Uhr...
- Page 46 LNB in the intermediate frequency range of 950 to 2150 MHz. This makes a transmission and processing at the receiver possible. 1. ZF = Intermediate frequency BDA TELE SSC 1 11_08 D.indd 44 01.01.1970 2:46:05 Uhr...
-
Page 47: Technical Data
Power supply: Power intake: max. 19 W Input voltage: 12 V, 1.5 A max., 50 Hz alternating voltage General: Dimensions (W x D x H): 100mm x 62 mm x 26 mm BDA TELE SSC 1 11_08 D.indd 45 01.01.1970 2:46:05 a.m. - Page 48 Defective or missing cable Check all cable connections connection Defective LNB Replace LNB Incorrect external unit set at the Correct the setting (see Point receiver Antenna aligned incorrectly Realign the antenna 01.01.1970 2:46:06 a.m. BDA TELE SSC 1 11_08 D.indd 46...
- Page 49 BDA TELE SSC 1 11_08 D.indd 47 01.01.1970 2:46:06...
-
Page 50: For The Daily Use
Control the volume of your receiver with the help of the buttons Volume + f or louder a nd Volume – for softer. > The sound can be switched on/off by pressing the button Sound on/off. BDA TELE SSC 1 11_08 D.indd 48 01.01.1970 2:46:07...