Installing The Usb Driver - Omron CJ2 User Manual

Appendices
A-5

Installing the USB Driver

The USB driver must be installed in the computer to connect the PLC to the computer using the USB
port.
Procedure for Installing the USB Driver
This section describes the procedure for connecting a computer to the peripheral (USB) port on the
CJ2 CPU Unit for the first time. This example assumes that the Support Software is already installed.
Windows XP
1.
Turn ON the power supply to the CJ2 PLC, and connect a USB cable between the USB port on
the computer and the peripheral (USB) port on the CJ2 CPU Unit.
After the cable has been connected, the computer will automatically recognize the device and
the following message will be displayed.
2.
If the following window appears, select the No, not this time Option and then click the Next But-
ton. This window is not always displayed.
3.
The following window will be displayed. Select the Install from a list of specific location Option
and then click the Next Button.
A-110 CJ2 CPU Unit Hardware User's Manual