Omron CJ2 User Manual page 265

CJ1W-OD232 Transistor Output Unit (32 Points)
Name
Model
Rated Voltage
Operating Load Volt-
age Range
Maximum Load Cur-
rent
Leakage Current
Residual Voltage
ON Response Time
OFF Response Time
Load Short-circuit
Protection
Insulation Resistance
Dielectric Strength
Number of Circuits
Internal Current Con-
sumption
External Power Sup-
ply
Weight
Accessories
Circuit Configuration
CJ2 CPU Unit Hardware User's Manual
32-point Transistor Output Unit with MIL Connector (Sourcing Outputs)
CJ1W-OD232
24 VDC
20.4 to 26.4 VDC
0.5 A/point, 2.0 A/common, 4.0 A/Unit
0.1 mA max.
1.5 V max.
0.5 ms max.
1.0 ms max.
Detection current: 0.7 to 2.5 A
Automatic restart after error clearance. (Refer to page A-115.)
20 MΩ between the external terminals and the GR terminal (100 VDC)
1,000 VAC between the external terminals and the GR terminal for 1 minute at a leak-
age current of 10 mA max.
32 (16 points/common, 2 circuits)
5 VDC 150 mA max.
20.4 to 26.4 VDC, 70 mA min.
80 g max.
None
COM0 (+V)
COM0 (+V)
OUT0
OUT15
SW
Output indicator
OUT0
OUT15
ERR indicator
• When the output current of any output exceeds the detection current, the output for
that point will turn OFF. At the same time, the ERR indicator will light and the corre-
sponding flag (one for each common) in the Basic I/O Unit Information Area (A050 to
A069) will turn ON.
Signal Allocated
name
CIO word
I/O word "m"
to
0 V
COM1 (+V)
COM1 (+V)
to
I/O word "m+1"
0 V
Appendices
A-35