Connecting Plc Components - Omron CJ2 User Manual

Installation Dimensions (Unit: mm)
Installation Height
The installation height of the CJ-series CPU Rack and Expansion Racks varies from 81.6 to 89.0 mm,
depending on the I/O Units that are mounted. When a Programming Device (e.g., CX-Programmer) is
connected, however, even greater height is required. Allow sufficient depth in the control panel contain-
ing the PLC.
Approx. 100 to 150 mm
5-2-4

Connecting PLC Components

The Units that make up a CJ-series PLC can be connected simply by pressing the Units together and
locking the sliders by moving them toward the back of the Units. The End Cover is connected in the
same way to the Unit on the far right side of the PLC.
1.
Join the Units so that the connectors fit exactly.
CJ2 CPU Unit Hardware User's Manual
27.5
35
27.5
81.6 to 89.0 mm
Hook
A
90
65
Hook holes
Connector
5 Installation
DIN Track
A
PFP-100N2
16 mm
PFP-100N 7.3 mm
PFP-50N 7.3 mm
5
5-11