Yachtsense Ecosystem; Power Connection - Raymarine YachtSense Link Installation & Operation Instructions

Marine 4g router

Table of Contents

3. RayNet to RayNet (SeaTalkhs ®) network cable.

4. SeaTalkng ® spur cable.

5. SeaTalkng ® power cable (supplying 12 V dc power. 5 amp inline fuse

is required).

6. SeaTalkng ® to DeviceNet spur cable.

SeaTalkng ® backbone.

5.5 YachtSense ecosystem

YachtSense ™ is Raymarine's digital monitoring and control solution. The

YachtSense ™ ecosystem enables on and off boat monitoring and control of

connected vessel systems and data. On boat monitoring and control can be

achieved using a Raymarine Axiom MFD or the Raymarine app installed on

a mobile phone or tablet. Off boat monitoring and control can be achieved

using the Raymarine app. Off boat monitoring and control requires a valid

premium subscription.

The full YachtSense ™ ecosystem consist of:

• YachtSense Link router

• YachtSense Digital Control System

• Raymarine mobile app

• Premium app subscription (required for off-boat connectivity)

• Axiom MFDs

Note:

• The YachtSense ™ Link router must be connected to the same SeaTalkng

backbone and as the YachtSense Digital Control System and any MFDs.

• The router also requires a RayNet connection to the YachtSense Digital

Control System's master module and any MFDs.

The supplied power cable must be connected to a 12 V dc or 24 V dc power

supply, this can be achieved by connecting directly to a battery, or via the

distribution panel.

YachtSense ™ Link

2. Power cable (supplied)

3. Drain wire connects to vessel's RF ground point, if no ground point is

available connect to the battery negative (-) terminal.

4. Negative wire connects to power supply negative (-) terminal.

Table of Contents