System Software Updates - Raymarine a series Installation Instructions Manual

6.23 System software updates

Raymarine regularly issues software updates for
its products that can provide new and enhanced
features and improved performance and usability.
You should ensure that you have the latest
software for your products by regularly checking the
Raymarine ® website for new software. Raymarine
MFDs can be used to check and update the software
of compatible Raymarine
You can identify product software versions using
the Diagnostics page on your MFD: Homescreen
> Set-up > Maintenance > Diagnostics > Select
Device.
The system update process can be used to update
all compatible products connected over SeaTalk
and SeaTalk ng® .
Please refer to the Software Update section of the
Raymarine ® website www.raymarine.com/software
for details of compatible products.
Caution: Downloading software
updates
The software update process is carried
out at your own risk. Before initiating the
update process ensure you have backed
up any important files.
Ensure that the unit has a reliable power
supply and that the update process is not
interrupted.
Damage caused by incomplete updates
are not covered by Raymarine warranty.
By downloading the software update
package, you agree to these terms.
Downloading software updates
Software updates can be downloaded from the
Raymarine website.
To perform a software update you will need:
• A PC or Apple Mac with an internet connection
and a card reader.
• A FAT 32 formatted MicroSD card with SD card
adaptor.
Note: Do not use a cartography chart card for
software updates or user data / settings backups.
1. Go to the Software update section of the Rayma-
rine ® website www.raymarine.com/software
Getting started
® products.
2. Compare the latest available software against the
software version of your Raymarine
3. If the software on the website is newer than the
software on your products download the relevant
software package.
4. Insert the MicroSD card into your PC or Mac card
reader.
®
Depending on your computers card reader type
an SD card adaptor may be required.
5. Unzip the downloaded software package 'zip' file
to the MicroSD card.
6. If used, remove the MicroSD card from the SD
card adaptor.
Performing software updates
Attention Do NOT perform software updates whilst
your boat is underway.
1. Backup your user data and settings.
2. Insert the MicroSD card containing software
update files into the card reader of your Data
Master MFD.
If the inserted card contains updated software
for a device on your system, after a few seconds
a pop-up message is displayed. If you need
to re-install or downgrade software then select
the Check Card for Updates option from the
hs
Maintenance menu: Homescreen > Set-up >
Maintenance.
3. Select Yes.
A second pop-up is displayed.
4. Select Ok.
The Software updates page is displayed.
1
3
5
Estimat e d time : a pprox. 9 mins
1 No software update available on memory card
2 Software update available on memory card
3
Software on memory card is older than the
software installed on the product
4
Software update available on memory card
5 Partial software update available on memory card
6 Software version on memory card is the same as
the software installed on the product
If a software update is available on the memory
card the Update? box is automatically ticked.
5. On touchscreen displays you can select and hold
on the available software version to see further
details about the software that will be installed.
CP 100 v11.12
i70 v2.16 v2.18
RMK-9 v11.16 v9.30
a 97 v12.26 v13.30
e 7 v13.30 v13.30 P a rtia l
g S 95 (Th is De vic e ) v13.30 v13.30
® products.
D13270-1
95