Table of Contents
Advertisement
For the gateway embedded web interface:
Internet Explorer 9
Safari 5.1
Firefox (Windows 21.0, Mac 12.0)
Chrome (Windows 27.0.1453.110, Mac 26.0.1410.65)
Opera (Windows 12.02, Mac 12.10)
Installation Overview
Before installing your gateway device, read the safety guidelines carefully. Not following these
guidelines can cause harm to the gateway, yourself or other persons.
Bypass Modemulator to use Gateway Mode
The USRobotics Courier Modemulator & 3G M2M Cellular Gateway can bypass the Modemulator logic
to operate as a USR3510 cellular gateway.
To put the Modemulator into gateway mode, move the MODE switch to the right if not already there.
With power applied to the gateway, the MODE LED will be red when the Modemulator is switched into
gateway mode.
To install the base unit:
1.
Attach the
antennas.
2.
Install the
SIM, if your wireless operator is using a SIM card, or make sure that a service plan is
associated with your device (for Sprint and Verizon).
3.
Register the Gateway
4.
Power on the
Gateway.
5.
Connect the Gateway to a laptop
6.
Select a wireless operator
For operators using a SIM card, the network settings will populate automatically for most SIM
cards. Check the settings of the APN , Username and Password. Update them if appropriate.
Click Save changes.
Revision: 1.00
MODE
on the Provisioning Server.
and log in to the embedded web interface.
in the 3G Connection tab.
Learn more about 3G network settings
Copyright 2015 U.S. Robotics Corporation
11 |
P a g e
Advertisement
Table of Contents
