US Robotics USR3520 User Manual page 69

IP Config

Displays the IP, netmask and gateway addresses of the connected WLAN network.
Available & Known networks

Lists the WLAN networks within range and displays the signal quality, SSID, status, and encryption
method of each.

Click the Refresh icon to refresh the network list.
Connecting to a WLAN Network
To connect to a WLAN network:
1. Click the network name.
2. Enter the network password and click Connect.
3. Note the status change to connected in the Available & Known Networks list.
Creating a Manual Connection to a WLAN Network
If the WLAN network you want to use is not in the list of known networks, you can create a manual
connection.
Revision: 1.00 Copyright 2015 U.S. Robotics Corporation 69 | P a g e