US Robotics USR3520 User Manual page 21

3g m2m cellular gateway
Hide thumbs Also See for USR3520:
Table of Contents

Advertisement

Logging On to the Base Unit
To log on to the embedded web interface:
1. In a web browser, go to the URL: 192.168.1.1.
2. Enter the user name and password, and then click Login.
Use the default username admin and password admin. You can
and password
later if necessary.
Home Tab
The Home tab displays the gateway connection status, the connection settings, the different available
LAN interfaces and the firmware and software versions installed.
Connection status
Displays the type of Internet connection and reports if the unit is connected or not connected.
Connection settings
Internet connection enabled:
This parameter enables (Yes) or disables (No) the WAN interface.
Connections strategy:
This parameter defines which interface should be chosen to connect to the internet (WAN
interface) in case multiple solutions are possible. Two possible solutions are available: Manual
and priority based.
Manual
In manual mode, the interface with a blue background will be the one and only interface to the
internet (WAN interface).
In order to change the interface press on the "use this" button behind the interface you would
like to be the WAN interface.
Revision: 1.00
Copyright 2015 U.S. Robotics Corporation
change the default username
21 |
P a g e

Advertisement

Table of Contents
loading

This manual is also suitable for:

Usr803520Courier usr3510Courier usr803510

Table of Contents