Gateway Installation; What You Need Before You Begin - US Robotics 9108 User Manual

U.S. Robotics Wireless MAXg ADSL Gateway User Guide
Wireless MAXg ADSL Gateway
User Guide
Home Installation
Installation Connections QuickSetup LEDs Advanced Uninstall

Gateway Installation

Installation Overview & System Requirements
Note: It is important that you have your serial number written down for future reference. If
you ever need to call our technical support department, you will need this number to receive
assistance. You can find your 12-character serial number on a bar code sticker located on the
bottom of the gateway and also on the box. You will also need your model number.
This gateway's EasyConfigurator installation software works with the following operating
systems:
Windows XP, Me, 2000, NT 4.0, 98
Macintosh
Linux
You will need to have a computer with an Ethernet Network Interface Card (NIC) installed
and/or an 802.11b/g compatible wireless adapter installed, as well as a Web browser that
works with the HTML 4.01 specification with Javascript enabled.

What You Need Before You Begin

You will need active ADSL and Internet service from your local telephone company or
Internet Service Provider (ISP) before you try to go on the Internet. You may also need the
following from your ISP:
VPI/VCI values
ADSL standard (modulation)
Encapsulation mode
Authentication (PAP or CHAP) for PPP connections
Your user name and password, if they were assigned by your ISP.
Step 1. Connect Microfilter (if included or required by your
ISP)
A microfilter removes interference between voice and DSL signals. Your ISP will determine if
a microfilter is necessary. If a microfilter was not included with the gateway, you may want
to ask your ISP if you need to purchase one or more of them.
To install a microfilter, plug each device (phone, fax machine, or other telephony device) into
file://C:\Documents%20and%20Settings\ivonne\Local%20Settings\Temp\Rar$EX48.000\insta...
Configuration Help
第 1 頁，共 7 頁
2005/7/4