Table of Contents
Advertisement
Moving a device from another group
Go to 'Devices/Group/Manage devices', then check the device(s) you want to move and click
'Change group'
Then choose the destination group and confirm the changes.
Move a device to another group
If you want to move a device to another group, the following needs to be in place:
You need to be an 'Owner' of both groups...both for the group you are moving the device from
and for the destination group
Device type needs to be the same for both groups
To move a device to another group:
1. Go to 'Devices/Group/Manage devices', then check the device(s) you want to move and click
'Change group'
2. Then choose the destination group and confirm the changes.
3. Next time the device(s) checks-in, it will download the group software settings
It is also possible to move a device to another group from a device detail page. Click the
'Edit device' button and follow the steps 2 & 3 as mentioned above.
Note: If this device had a custom setup in the previous group, when moving the device, the custom
setup will disappear and follow the new group settings (unless you choose to make this device
custom again after moving the device)
Edit Group Name and Description
You can always edit the group name or description for your groups.
Revision: 1.00
Copyright 2015 U.S. Robotics Corporation
118 |
P a g e
Advertisement
Table of Contents
