Table of Contents
Advertisement
Back Panel
10
9
9. External Power Supply Input – This input receives operating power from the external low voltage
power supply that is included with the base unit. Connect the included power supply to this connector.
10. Reset Button - Press and hold for less than five seconds to reset the unit to the last working settings.
Press and hold for five seconds or more to reset the unit to factory settings.
Bottom Back Panel
The bottom back panel covers the opening for the back expansion slot and is removed when installing
an expansion card.
Option provides a custom panel for the following expansion cards:
Wi-Fi Card
Developer Card
Revision: 1.00
Copyright 2015 U.S. Robotics Corporation
76 |
P a g e
Advertisement
Table of Contents
